What size post should I use for a 6 foot fence?

Does concrete preserve wood?

With concrete holding the moisture against the wood, wood has no chance and will eventually lose the battle. Now you don’t have to lose all hope because it’s for certain that the concrete around the post will crack, therefore making it easy to pull out when it starts to rot.

How deep should a fence post hole be?

600mmFor example, if you have a 3 inch wide post that you need to sit over 1.83m (6ft) in height above the ground, we recommend the hole size should be: 230mm [wide] (9”) x 600mm [depth]. This rule of thumb that can be followed for all size posts (e.g. a 6ft high fence would require a hole depth of at least 600mm or 2ft).

What is the difference between Postcrete and concrete?

Concrete takes several hours or a day or two to set. Postcrete sets in a few minutes, several tens of seconds, even, so you don’t have to support the post for nearly as long as you do with concrete.

How much cement is needed for a fence post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

What size post should I use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.

Can I pour concrete in a hole full of water?

The water in the hole under the pipe can be sucked out with a wet-dry vacuum before and during the repair job.

Posted in 8

Leave a Reply

Your email address will not be published. Required fields are marked *